Spectroanalyzer CA-02/CA-03 

2 channel signal analyzers СА-02/03 are multifunctional devices based on PC. The analyzers are intended for executing various operations in acoustic and vibrational frequency ranges.

• measurement and analyzing of noise and vibration in the mode of real time
• research of vibro/acoustic characteristics of various devices and mechanisms
• diagnostics of mechanical equipment for its technical condition measurement and for showing up the misfunctions
• ecological control

Digital multi-channel recorders МА-08/16 

Digital multi-channel recorders execute measurement and non-stop recording of the information from primary convertors as files on the PC hard disk.

• 8/16 channels
• input voltage range: +/-10 V
• dynamic range:130/110 dB
• resolution: 24/14 bit
• maximum sampling rate:102.4/409.6 kHz
• ICP power supply for each channel is 24 V, 4 mА
• the quantity of the information recorded is limited only by hard disc

• 2 channel oscilloscope, 2 generators and a logical analyzer
• the oscilloscope sampling rate is upto 100 MHz , 2 channels (or 1 channel)- 200 MHz, in the mode of equivalent sampling rate - upto 20 GHz
• oscilloscope bandwidth: 200 MHz
• onboard memory: 64K ( can be broadened/ expanded)
• analog input of external triggering
• automatic measurement of 22 parameters of the captured signal
• DAC resolution - 14 bit , sampling rate - 100 MHz
• 32 channel logical analyzer, sampling rate upto 400 MHz
• 16 channel logical generator, sampling rate - 100 MHz
• 4 channel volt-meter 
• program software for Windows95/98/NT/2000
• connection with USB, LPT ports or COM

Is produced as a module of the UNIPRO measuring station and as an independent block with its own source of power - B-371.

• 2 channels
• temporary resolution: 2,5 ns
• "Dead" time: 5 ns
• apparatus histogramming
• histogramming channel: upto 32 bit
• memory: 64 К

Designed as a set of measuring modules for the UNIPRO measuring station . It is intended for measuring of vibration and cinematic load and for multiparameter express checking of various mechanisms and devices.

• inbuilt digital signal processor with floating "," 
• inbuilt buffer memory: 4 MB
• the speed of data transmission to the PC - 2 MB/s
• 2 channels for connection with digital data units of angular transfer.
• Digital data units for measuring various parameters can also be connected with the meter
• facilities for connection with 2 cards B-161
• integrated software for Windows 95/98/2К/NT
• trigger vibro/acoustic measurement

• acoustic noise meter of the 3rd class
• 8 channels
• digital measuring microphones
• frequency characteristics - A, C, Lin
• time chracteristics: response F (quick) and S (slow)
• measurement of equivalent noise level (LEQ)
• range of measurement: 60...125 dBa
• hardware DSP, FFT spectrum analyser
• octava/ 1/3 octava analysis
• trigger vibro-acoustic measurements