| |
Functional/Arbitrary waveform generator
AGENT B230 - Price:$550
- The waveforms are standard
- The beforehand captured signals are rendered
- Sampling rate is upto 100 MHz
- DAC resolution is 14 bit
- Onboard memory : 64 KB
- Output voltage range: +/- 8V, +/-3V
- Autocalibration on duty
- Analog I/O of external triggering
- Function of voltage meter and frequency meter
- Software for Windows95/98/NT/2000/XP
- PCI bus
|
| |
Function/Arbitrary Waveform Generator's
module B-131 (B-332) - Price:
$ 1283
Intended for generation of sine wave rectangle and triangular
signals in wide amplitude and frequency ranges. Signals
can be set analytically (by equations), graphically (by
mouse), imported from the file (for example, acquired
by digital oscilloscope) or by any combination of signals,
formed in the above mentioned ways
- 2 output channels
- Output impedance of the channels- 50 O
- DAC resolution: 14 bit
- Waveform output voltage range:
- 1 - ±2 V (±1V) on 1 kÎhm or 50 Îhm
- 2 - ±8 V (±4V) on 1 kÎhm or 50 Îhm
- DAC resolution: 14 bit
|
| |
PC Function Generator PCG10 - Price:
$ 533
- The waveforms are standard
- facilities for making individual waveforms
- sampling rate: 32MHz
- DAC resolution: 8 bit
- frequency range : from 0.01Hz upto 1MHz
- non-linear distortion: 0,08 %
- onboard memory: 32K
- output voltage range: 100 mV - 10 V on 600 Ohm
- external trigger output - TTL level
- total galvanic isolation of the PC
- LPT connection
- includes software for Windows '95/'98/NT/2000/XP
|
| |
| Waveform generator GSPF-052 - Price:
$399
Waveform generator GSPF - 052 is a functional /arbitrary
waveform source which is used for automatic research tuning
and testing devices and systems in industry science and
education
arbitrary waveform
frequency range DC: 23 MHz...10MHz
high accuracy of amplitude and frequency setting
low level distortion ( less than 0,1 %)
output waveform amplitude: +/- 5V on 50 Ohm
work under PC control
|
| |