In combination with a PC, the DSO 2100 is a two-channel, digital 30MHz storage oscilloscope. The operating interface and graphics to show the curves are laid out as for normal oscilloscopes. It's all possible with the Windows 95/98 software provided! The oscilloscope attachement is connected via the parallel port of the computer using the software cable provided. You have two completely separate channels at your disposal, each with a scanning frequency of 100MS/s. The Auto-Setup function gives the best possible automatic setting of the measurement range after a new measurement signal has been applied. In addition, you can also use the DSO 2100 as a spectrum analyser: it shows you the individual harmonics, so you can, for example, analyse filter circuits. A further major advantage of this device lies in the fact that it saves the measurement data obtained on your hard disk.