Professional measuring station UNIPRO
UNIPRO is the universal measuring device for wide range of
applications. The possible areas of its use - automation of scientific
researches in physics, biology, medicine; adjustment of the electronic
circuits, TV and radio equipment; industrial needs. UNIPRO
can be used for creation of the automated measuring systems.
Professional measuring station UNIPRO is registered in State Registry
of tools of measurement of Belarus (certificate 1239) and Russian
Federation (certificate 11088).
UNIPRO provides simultaneous functioning up to three measuring
modules which are included in a basic set. Each of measuring modules
can be replaced by any other module from the basic set, or be absent.
UNIPRO designed with flexible structure. It can configure
from a various combination of measuring modules, which are included
in basic set. Besides case/power unit B-102 and interface module B-112.
Basic set
Digital Oscilloscope’s module B-121
Intended for measuring of single or repetitive electrical signals
in the frequency range from 0 up to 200 MHz, digital measurements
of amplitude and time parameters, mathematical processing of measuring
data.
Function/Arbitrary Waveform Generator’s module B-131
Intended for generation of sine wave and triangu-lar signals in frequency
range from 0,1 up to 10 MHz, signals of the rectangular shape in frequency
range from 0,1 up to 50 MHz, signals of the any shape with frequency
range from 0,25Hz up to 100 MHz. Signals can be set analytically (by
equations), graphically (by mouse), imported from the file (for example,
acquired by digital oscilloscope) or by any combination of signals,
formed through mentioned above ways.
Logic Analyser’s module B-141
Intended to capture, store and represent digital data, reflecting
the system under test behavior. LA provides asynchronous/synchronous
capture the input signals of 0.5 - 10V swing, in 0 – 100 MHz frequency
range. LA’s operation is based on recording the acquired measuring
data to the internal memory upon trigger module control followed by
the representation of captured data on PC monitor in easy-to-analysis
form.
Additional measuring units
Vibration and kinematics meter VIKING-2
Number of channels: 4; wide-range charge-dependant preamplifier for
piezo-probe; dynamic range: 90 dB; hardware DSP, FFT spectrum analyser,
jctava/ 1/3 octava analysis; synchronous vibro-kinematics measurements.
Roughness and circularity meter B-151/162
3-12 accuracy class; track length - 17 mm; automatic measurements
Ra, Rz, Rmax, Sm, Tp.
Multifunctional histogramming time interval meter B-171
Number of channels: 4;time resolution: from 2,5 ns; "dead" time: 5
ns; hardware histogramming; maximum histogramm channel memory depth:
up to 32 bit; maximum memory depth: 64 K.
UNIPRO operates under remote control of any type of personal
computer (industrial, office or notebook) with the Microsoft operational
systems WINDOWS –95/98/NT/2000/XP.
- PC interfaces: printer port, ECP/EPP protocols, serial bus RS-232,
universal bus USB
- Power supply - 220 V/ 50 Hz
- Consumption - 40 W
- Size: measuring unit max. - 190x250x20 mm UNIPRO station - 295x265x110
mm
- Weight: B-131 generator - 3,15 kg
Download software
and documentation
|
