Function generator & waveform synthesizer GSPF-052

Application

GSPF-052 signals generator is a source of free-style signals. It is used for automated investigations, testing and tuning devices and systems in the fields of science industry and education.

Special characteristics

free style of the generated signal

frequency range DC; 23 mHz…10 MHz

high accuracy of range and of frequency setting

low level of harmonics (less than 0.1%);

output signal range ±5V; @50 Ohm;

work under PC control

Technical characteristics

Signal frequency
Frequency range	DC or from 0,023 Hz upto10 MHz (work with inbuilt clock generator)
Accuracy of frequency setting	not worse than 0,01% (depends on the frequency range)
Signal range
Output signal range	0...±5 V (load 50 Ohm) 0...±10 V (no load)
Fixing mistake	upto 2%
Mistake	±10 mV (maximum output signal)
Attenuator	0 -42 dB (6 dB, -12 dB, -24 dB) ±0,2
Output generator impedance	50 Ohm +5%
Sinusoidal signal
Harmonic coefficient	upto 0,1% (200 kHz)
Rectangle signal (Load: 50 Ohm)
Front/back length	upto 24 ns
Out-throw	upto 5%
Fixing time	45 ns
Unevenness of the top in 45ns after fixing	less than 2%
Free-style signal
Buffer dimension	2...262144
Buffer interval	2 points
Inbuilt generator frequency	100 MHz
Base frequency	100 MHz, 50 MHz, 25 MHz...6 MHz (15 ranges)
Range interval	14 bit (+8192 levels)
Synchro outputs
Number of extra outputs	2 programmable synchro-signals TTL levels
Work modes
Modes of signal forming	Cyclic, program, single, single on external start, cyclic on external start
General data
Interface	PCI 2.1
Power required	upto 9 W (+5V, 1,8?)
Card weight	upto 250 g
Dimensions	less than185 mm*116 mm*25 mm