The card is designed as a standard PCI expansion card. A driver that is included in the software enables the cards
work under the control of Windows 9x\ME\2000\XP.
After fixing the card in a free PCI slot of your PC and after loading the
operation system will find a new device "PCI Co-processor CPU"
and will propose to to install a driver for it.
You should chose "Searching for the most suitable driver" ( with note on disk A:)
if the software provided with the card is on a floppy disk if
not you should show the full way to \XdspDriver (file "MDMAI.inf").
If you install the driver manually you should chose "Install
from disk" in the window with a proposal to chose the most suitable driver then
chose catalog\XdspDrivers (file "MDMAI.inf").
And then follow the instructions of the system. If there appears a note "digital signature not found" when
you install the driver under the control of Windows 2000\XP
you should answer "Yes" to the question "Continue installation?". After
installing the driver it's necessary to reload your PC. If there is more than 1
card in a system it is necessary to execute installation of a card driver for
each of them.After successful installation of the driver you may go to the
device manager and make sure the device and the driver work properly (division
XDSPDEVICES).
To watch the main functions of the card you may use the
program Xdsp_Oscilloscope which is included in
the software set of the card (initial text in Delphi).
